Watch size guide: diameter, lug to lug and thickness
You are trying to work out whether a 40 mm or 42 mm watch will suit your wrist before you buy it. Diameter is the figure brands quote, but lug to lug decides whether the watch sits on your wrist or hangs over the edges, and thickness changes how it feels.
The measurements that decide fit
Case diameter is the width of the case from side to side, and the figure most brands lead with. Lug to lug is the length from the tip of the top lugs to the tip of the bottom lugs, and it is the measurement that decides whether the watch fits across your wrist. Case thickness is how tall the watch stands, and it changes how comfortable the watch feels.
Lug width is a fourth figure, the gap where the strap fits. It matters for straps, not for fit.
Checking a watch against your wrist
Look at your wrist from above and measure straight across its flat top. A watch whose lug to lug is shorter than that sits inside the edges. When the lugs run past the edges, the watch overhangs and looks too big, whatever its diameter.
Two watches with the same diameter can wear very differently. Short lugs that curve down towards the wrist keep a large case compact, while long, straight lugs make a smaller case wear bigger.
Watch sizes on Watchnik
Watchnik lists a case diameter for 5,600+ references, a lug to lug length for 1,600+ and a thickness for 4,000+. The middle values are 39 mm across, 46 mm lug to lug and 12 mm thick. The largest size group is 40 to 42 mm, with 1,100+ models.
| Case diameter | Models | References |
|---|---|---|
| Under 36 mm | 830+ | 1,700+ |
| 36 to 39 mm | 790+ | 1,300+ |
| 40 to 42 mm | 1,100+ | 1,700+ |
| 43 mm and over | 600+ | 890 |
Real examples, smallest first
Watches on Watchnik with all three measurements held, so you can compare them with one you already own.
| Watch | Reference | Diameter | Lug to lug | Thickness |
|---|---|---|---|---|
| Cartier Tank Louis Cartier Large Manual | WGTA0011 | 25.5 mm | 33.7 mm | 6.6 mm |
| Tudor Black Bay 54 79000N | 79000N-0001 | 37 mm | 46 mm | 11.2 mm |
| Seiko Presage HCB001J1 | HCB001J1 | 38.5 mm | 45.4 mm | 11.8 mm |
| Rolex Submariner 114060 | 114060 | 40 mm | 48 mm | 12.5 mm |
| Patek Philippe Nautilus 5726/1A-014 | 5726/1A-014 | 40.5 mm | 45.2 mm | 11.3 mm |
| TAG Heuer Carrera Chronograph 41 Blue | CBS2113.BA0053 | 41 mm | 47.48 mm | 14.17 mm |
| Omega Speedmaster Professional Moonwatch Big Box 311.30.42.30 | 311.30.42.30.01.004 | 42 mm | 48.2 mm | 13.8 mm |
| Longines Hydroconquest Quartz 42 Stainless | L3.769.3.56.7 | 42 mm | 51.2 mm | 11.3 mm |
Questions
What lug to lug should I look for?
One no longer than the flat top of your wrist is wide. Measure straight across the top of the wrist; a watch whose lug to lug is shorter than that sits inside the edges.
What is the difference between lug width and lug to lug?
Lug width is the gap between two lugs at one end of the case, which sets the strap width. Lug to lug is the length of the whole watch from the top lugs to the bottom lugs.
Why does a smaller watch sometimes look bigger on the wrist?
Long, straight lugs can make a modest diameter wear large, while short, curved lugs keep a bigger case compact. Lug to lug often says more about fit than diameter does.
More definitions are in the watch glossary.
Information on this page was sourced from multiple places, including Gear Patrol, Kapoor Watch and others.