Guide · Updated

Watch water resistance ratings explained

You have seen 30 m, 100 m or 300 m on the back of a watch and want to know whether you can swim in it. The number is a test pressure, not a depth. A 30 m watch is for rain and splashes, 100 m suits swimming and snorkelling, and diving calls for a dive watch.

What each rating means in practice

Brands publish their own guidance, and it mostly agrees. The table follows Casio, Citizen and Seiko; where they differ, the table says so. A rating of 10 m equals 1 bar or 1 ATM.

RatingAlso writtenWhat it suitsNot for
30 m3 bar, 3 ATMRain and splashesSwimming
50 m5 bar, 5 ATMBathing and showering for Casio; swimming for Seiko and water sports for CitizenDiving
100 m10 bar, 10 ATMSwimming and snorkelling, and diving without an air cylinder for Seiko and CitizenScuba diving
200 m20 bar, 20 ATMThe same as 100 m, plus free diving for CasioScuba diving, unless the watch is also marked as a diver
Diver 200 m or 300 mDiver, ISO 6425Scuba diving, including long periods underwaterSaturation diving, which needs a watch built for it

A plain 200 m and a diver rated 200 m are different things. Citizen lists its 20 bar watches and its 200 m divers separately, and only the divers for scuba.

Why the number is not a depth

The figure describes the pressure the case was tested to hold while still. Casio calls the metre figure a picture of the test pressure, not a usable depth, and points out that moving your arm through water adds pressure on top of the static figure. Citizen likewise warns its 3 bar watches off any change in water pressure.

To keep the rating, screw a screw-down crown fully home before the watch meets water.

ISO 6425: what makes a dive watch

ISO 6425 is the international standard for dive watches. Its current edition dates from 2018. A watch that meets it must:

  • be rated for diving to at least 100 m, and pass a pressure test at 125 per cent of that rating;
  • have a way to time a dive that is protected against being turned by accident, usually a unidirectional bezel with a 60-minute scale;
  • stay readable in the dark at 25 cm, with a sign that the watch is running;
  • pass tests for magnetism, shock, salt water and the strength of the strap or bracelet.

Watches built for saturation diving go further, and some carry a helium escape valve.

Water resistance on Watchnik

Watchnik lists a water resistance rating for 5,700+ references. The most common is 100 m, on 2,100+ of them. Each band links to the matching watches.

RatingModelsReferences
Under 50 m760+1,300+
50 to 99 m430+710+
100 to 199 m1,400+2,600+
200 to 299 m180+260+
300 m and over490+710+

For watches built for diving, see the dive watches list.

Questions

Can I swim with a 30 m watch?

No. A 30 m rating, also written 3 bar, covers rain and splashes. Casio and Seiko both advise against swimming with it.

Is 50 m water resistance enough for swimming?

It depends on the brand. Seiko rates 5 bar as suitable for swimming and Citizen for water sports, while Casio rates it for bathing and showering but not swimming. Casio and Citizen both list 10 bar, or 100 m, for swimming.

What does 10 ATM mean on a watch?

The same as 10 bar and 100 m. Every 10 metres of rating stands for 1 bar, or 1 ATM, of test pressure.

Does a dive watch need 300 m?

No. ISO 6425, the standard for dive watches, sets a minimum of 100 m, and each watch is tested at 125 per cent of its rated pressure.

More definitions are in the watch glossary.